Centralite 3-series Pearl Zigbee Smart Touch Thermostat

Elevate your home's comfort and efficiency with the Centralite 3-Series Pearl ZigBee Smart Touch Thermostat. Designed to work seamlessly with a variety of smart home systems, including Amazon Alexa, Google Home/Assistant, Nest, Samsung SmartThings, and Wink, this thermostat streamlines temperature control with its intuitive touch screen and digital control styles. The Pearl model comes complete with mounting hardware and batteries, ensuring a hassle-free installation. Its sleek white plastic design is both durable and stylish, measuring a compact 5.375" x 4.125" x 1.125" deep. Enjoy the convenience of auto system switching, coupled with the reliability of low voltage power, to maintain your desired temperature with ease.

Each Includes

• Centralite Pearl Touch Thermostat
• Mounting Screws and Anchors
• Installation Manual
• 4AA Batteries are not included

Features

• Compatible with the widest range of Home heating and Cooling appliances (no "C-wire" required for many HVAC applications).
   
• Compatible with All ZigBee HA 1.2 Platforms and has been tested to work with Samsung SmartThings, PEQ, Time Warner IntelligentHome, Bright House Networks Home Security and Automation, and Rogers Home Monitoring.
   
• Capacitive Touch Controls - With the swipe of a finger, you can set the temperature or lock changes using the HOLD button.
   
• Easy DIY installation by most homeowners in less than 15 minutes. Quick-connect wiring terminals eliminate the need for specialty screwdrivers or an extra set of hands.
   
• Save Energy, Save Money by adding connected home HVAC control, your home can be smarter about when it uses energy to heat and cool.
   
• Long lasting two-year battery life (with typical operation) 4-AA batteries (included) or common wire can be used for 24VAC.

ZigBee Connect

Note: The thermostat is configured to automatically search for open ZigBee networks upon power-up for 90 seconds.

Complete the following steps to join the thermostat to your ZigBee network:

1. Open your ZigBee touchscreen, router or gateway for joining.
    
2. On the thermostat, enter programming mode and navigate to menu option 12, press HOLD to enter the “Join Network” menu, press (+) to display “01”, then press HOLD again to begin searching for an open network.
    
3. The thermostat should now pair with your ZigBee network. Follow any on-screen prompts from your ZigBee touchscreen, router, or gateway to complete setup.

Specifications

MPN3157100-EWColorWhiteInterfaceCapacitive touch panelWireless supportZigBee Home Automation 1.2RequirementsZigBee wireless supported Smart HubCompatibilityAll ZigBee HA 1.2 Platforms, incl *:

• Samsung SmartThings
• Wink Hub
• Nest
• Time Warner IntelligentHome
• Bright House Networks Home Security and Automation
• Rogers Home Monitoring
• PEQ

A smart hub is required to connect with the following products:

• Amazon Alexa
• Google Home

Supported SystemsHeat

• Single-Stage Electric
• Two-Stage Electric
• Single-Stage Heat Pump
• Two-Stage Heat Pump
• Single-Stage Gas & Oil
• Two-Stage Gas & Oil
• Hot Water System (Boiler)**

Cool

• Single-Stage Conventional
• Two-Stage Conventional
• Single-Stage Heat Pump
• Two-Stage Heat Pump
• Water Source Heat Pump

Single Fan SpeedWiring Terminals

• Y1 | First-Stage Compressor
• Y2 | Second-Stage Compressor
• G | Fan (Single-speed only)
• W1 | 1st Stage Heat
• W2 | 2nd Stage Heat / Em. Heat
• O | Reversing Valve (Engaged on Cooling)
• B | Reversing Valve (Engaged on Heat)
• Rc | 24VAC (Cooling)
• Rh | 24VAC (Heating)
• C | 24VAC Common Wire

Dimensions5.375" x 4.125" x 1.125" DeepPower24VAC Common Wire and/or 4-AA BatteriesOperating Temperature0 to 40°CShipping/Storage Temperature-20 to 50°CHumidity Range0 to 90% R.H. (non-condensing)System Requirements

• ZigBee compatible hub/network
• Google Assistant requires a Samsung SmartThings hub

* Some ZigBee HA 1.2 platforms and hubs require device-specific whitelisting.

** Some boilers are not compatible with the Pearl Thermostat.